HEAVY DUTY ACCURATE SERIES:

Standard Features & Accessories:

Hardened & Ground Bedways, Chuck Plate - 1 No., Centre Adaptor, Dead Centre - 2 Nos., Tool Post Spanner, Change Gear Set for Whitworth and Metric Threads, Motor Pulley, Endless Flat Belt/V-Belt and Instructions & Spare Parts Manual

Details
Bed Length 5'6" to 24'
Admit between Centers 1'9" (530) to 20'3" (6175)
Bed Width 12 3/4" (323) & 14 3/4" (374)
Centre Height 10" (254), 12" (305) & 15" (381)
Spindle Hole 2-1/8"(54) to 6-1/8"(156)
MODEL Accurate - 
A B C D E F G H I J K
Length of Bed 5'6(1670)

7'(2130)

9'(2740) 10'(3040) 12'(3650) 14'(4260) 16'(4870) 18'(5480) 20'(6090) 22'(6700) 24'(7300)
Max. admit between Centers 1'9"(535) 3'3(1000) 5'3(1600) 6'3(1900) 8'3(2515) 10'3(3125) 12'3(3735) 14'3(4345) 16'3(4955) 18'3(5560) 20'3(6170)
Spindle Hole Standard: 52(2-1/8") | Optional: 3-1/8"(78), 4-1/8"(104), 6-1/8" (156) & 6-1/8"(155)
Bed Type 2V & 2 Flat
Height of Centre 10" (254) 12" (305) 15" (381)
Max. swing over Bed Dia. 19-1/2" (495) 23" (585) 29" (735)

Max. swing over

Cross Slide Dia.

12-3/4" BW 11-1/2"(295) 15-1/2"(395) NA
14-3/4" BW 11"(280) 15"(380) 21-1/4"(540)
Max Swing without Gap Dia. 28-1/4"(720) 32-1/4"(820) 41"(1040)
Width of Bed 12-3/4"(323) 14-3/4"(374)
Nos. of Spindle Speed & Range 8 (25 to 460 RPM)
Tail stock Spindle Dia. 2-1/8"(54)
Taper Of Centers MT-4
Tail Stock Spindle Travel 7-1/2"(190)
Cross Slide Travel 10"CH 11"(280) 13"(330)
12"CH 12-1.4"(310) 13"(330)
Compound Slide Travel 6"(150mm) 8"(200)
Tool Post Size (Square) 5"x5"

5-3/4" x 5-3/4"

Tool Shank Section 25x25 32x32
Lead Screw Dia. & Pitch Standard: 1-1/2"(38)/4 TPI | Optional: 1-3/4"(45)
Width of Gap in front Of Face Plate 8"(200) 9"(225)
Nos. of Inch Threads & Range 19/2 to 24 TPI | Optional: Norton Gear Box - 44/2 to 60 TPI
Nos. of Metric. Threads & Range 13/1 to 6MMP | Optional: Norton Gear Box - 24/0.5 to 15 MMP
Nos. of DP Threads & Range Optional: 11 (6 to 60)
Nos. of Module Threads & Range Optional: 12 (0.3 to 2)
Nos. of Longitudinal Feeds 32/0.16 to 2mm/rev | Optional: Norton Gear Box - 68/0.068 to 2.4mm/rev
Nos. of Transverse Feeds 32/0.038 to 0.48mm/rev | Optional: Norton Gear Box - 68/0.0016 to 0.57mm/rev
Power of AC Motor (HP) 2 3 3 3 3 5 5 7.5 7.5 7.5 10
Weight (Approx. in kgs) 1300 1400 1600 1800 2000 2200 2400 2800 3300 3600 4000