4080 Series
Standard Accessories:
Hardened Guideway, Switch Shaft, V Belts, Catch Plate Inch/mm Gears, Set Of 2 Nos. Dead Centres with Centre Bush, Oil Can, Set of Allen Keys, Spanners & Instruction Manual.
Optional Accessories:
Face Plate, Steady Rest, Follow Rest, Electric Coolant Pump with Tank & Fittings, Taper Turning Attachment, Rear Tool Post with Long Cross Side, Key way Cutting Attachment, Machine Lamp with Control Transforrner, Chuck Flange. 4 Jaw Dog Chuck, 3 Jaw True Chuck, Quick Change Tool Post with Tool Holders. Tool Post Grinder (External/Internal) Revolving Centre & Control Panel with Foot Brake.
- Flame Hardened Bedways
- Head Stock Gears are of special alloy case hardered steel, duty hardened and profile ground
- Head Stock Spindle is ground and runs in anti-friction taper roller bearing and one needle roller bearing in the front and one Taper roller bearing in rear
- Splash sock, norton and apron gear box
- Universa Norton gear box enables a wide range Of British and Metric threads
- 4080/4 & 5 are with Planner Type Bed
| 4080 SERIES | ||||||
| TYPE OF BED | 2 Flat & 2V | |||||
| HEIGHT OF CENTRE | mm | 400 | ||||
| WIDTH OF BED | mm | 455 | ||||
| SWING OVER BED | mm | 770 | ||||
| SWING OVER SADDLE | mm | 580 | ||||
| SWING OVER CROSS SLIDE | mm | 490 | ||||
| SWING IN GAP | mm | 1100 | ||||
| LENGTH OF GAP IN FRONT OF FACE PLATE | mm | 240 | ||||
| No. OF SPINDLE SPEED | 8 | |||||
| SPINDLE SPEED RANGE | RPM | 20-520 | ||||
| SPINDLE BORE | mm | 80 | ||||
| SPINDLE NOSE - TYPE | Bayonet-8 | |||||
| TAPER BORE IN CENTRE BUSH | MT | 5 | ||||
| TAIL STOCK QUILL DIAMETER | mm | 85 | ||||
| TAPER IN TAIL STOCK QUILL | MT | 5 | ||||
| CROSS SLIDE TRAVEL | mm | 400 | ||||
| COMPOUND SLIDE TRAVEL | mm | 200 | ||||
| TAIL STOCK QUILL TRAVEL | mm | 210 | ||||
| TOOL POST SQUARE | mm | 178x178 | ||||
| TOOL SHANK SIZE | mm | 38x38 | ||||