HYDRAULIC SHEAR C3006 CNC
- One block bench, mechanized, equipped with spheres to ease up the movement of the sheet
- Initial support machined to square of 1000mm with millimeter scale
- Three 1000mm millimetered stand arms
- LASER lightning on the cutting line
- LED front lightning
- Front polycarbonate protection screens that allows to see the cutting line
- Cutting of narrow strips without distortion
- 4-cutting edged upper and lower blades, with 90º angle, long lasting and the proper ones for cutting of steel.
- Driving with safety pedal and emergency stop
- Back overture with safety optoelectronic devices
- Low noise levels, improving the quality ofwork of the operator
- Ramp of material extraction located in the lowerpart of the cutting zone allows the material to slide down to the extraction area
| Feature | Description |
| Cutting length | 3055mm. |
| Cutting capacity | 6 mm in steel(450 N/mm2) and 4 mm in S.S. (700 N/mm2) |
| Gauge displacement | 700 mm |
| Goose neck for cuts with bigger length | 9.8 mm/s |
| Return speed | 173 mm |
| Strokes per minute | 12 strokes. (All length) |
| Hydraulic rammer | 15 units |
| Fix cut inclination | 1.75º |
| Motor power | 9.6 KW / 12.87 CV. |
| Engine power 3-phased tension | 230 / 400 V. 50/60 Hz |
| Hydraulic Pump | 22 liters |
| Container capacity | 96 liters |