MH-1
Standard Features & Accessories:
Hardened & Ground Bedways, Chuck Plate - 1 No., Centre Adaptor, Dead Centre - 2 Nos., Tool Post Spanner, Change Gear Set for Whitworth and Metric Threads, Motor Pulley and Instructions & Spare Parts Manual
| Details |
| Bed Length |
4'6" (1370), 5'3" (1600) & 6' (1825) |
| Admit between Centers |
1'9" (530), 2'6"(760) & 3'3"(985) |
| Bed Width |
11" (280) & 14 3/4" (374) |
| Centre Height |
9" (228) |
| Spindle Hole |
2"(50) |
| MODEL |
MH-1 |
MH-2 |
MH-3 |
| Length of Bed |
4'6"(1370) |
5'3"(1600) |
6'(1825) |
| Max. admit between Centers |
1'9"(530) |
2'6"(760) |
3'3"(985) |
| Spindle Hole |
2"(50) |
| Bed Type |
2V & 2 Flat |
| Height of Centre |
9"(228) |
| Max. swing over Bed Dia. |
17"(430) |
| Max. swing over Cross Slide Dia. |
25"(630) |
| Width of Bed |
11"(280) |
| Nos. of Spindle Speed & Range |
8/35 to 550 RPM |
| Tail stock Spindle Dia. |
2"(51) |
| Taper Of Centers |
MT-4 |
| Tail Stock Spindle Travel |
6"(150) |
| Cross Slide Travel |
9"(225) |
| Compound Slide Travel |
4-1/2"(115) |
| Tool Post Size (Square) |
4"x4" |
| Tool Shank Section |
25x25 |
| Lead Screw Dia. & Pitch |
1-1/4"(32), 4 TPI |
| Width of Gap in front Of Face Plate |
6"(150) |
| Nos. of Inch Threads & Range |
19/2 to 24 TPI | Optional: Norton Gear Box - 36/4 to 60 TPI |
| Nos. of Metric. Threads & Range |
13/1 to 6MMP | Optional: Norton Gear Box - 20/0.5 to 60 TPI |
| Nos. of DP Threads & Range |
Optional: 11/6 to 60 |
| Nos. of Module Threads & Range |
Optional: 12/0.3 to 2 |
| Nos. of Longitudinal Feeds |
32/0.16 to 2mm/rev | Optional: Norton Gear Box - 56/0.07 to 1.2mm/rev |
| Nos. of Transverse Feeds |
32/0.038 to 0.48mm/rev | Optional: Norton Gear Box - 56/0.0016 to 0.28mm/rev |
| Power of AC Motor (HP) |
1.5 |
1.5 |
2 |
| Weight (Approx. in kgs) |
570 |
660 |
750 |
