NON-MANDREL TUBE AND PIPE BENDER CC60 CNC
- Repetition on the curve of +/- 0.1 degrees
- Reinforcement tool post support arm for pipes with diameter over 40 mm included
- 400 ml BEND 8 lubricant included
- Two bending directions, right or left for easier bending
- Quick die change over: Maximum 60 seconds
- 4.0 Technology
- CNC control with 7" touchscreen with more than 20 different languages
- Safety pedal to the right and left.
- Side shelving to store tools.
- All bend dies are made of tempered steel for longer tool life
- The counter dies are made of bronze alloys to help prevent markings on the outside of the bent profiles
- Stores up to 10,000 programs
- Up to 50 different angles on the same piece can be programmed.
- Dimensions can be programmed in inches or millimeters
- Pivot system with automatic unlocking to help remove material
- Automatic and programmable springback correction
- Automatic unlocking
- Automatic and programmable springback
- Offset head for complex parts
- Reinforcement tool post support included
- Packaging included
- A lower pallet bench to transport the machine to the worksite or storage
- The CC60 pipe bender is sent completely assembled
- An wooden pallet and 3-layer cardboard box suitable for seafreight
| Feature | Description |
| Maximum size on S275 round steel pipe | 60.3 mm or 2" Schedule-40 or 2"1/4 x 4 mm. |
| Maximum size of aluminium pipe | 60.3 mm x 8 mm / 2.375" x .315 |
| Maximum size on stainless steel pipe 304 / 316 | 60.3 mm x 3 mm / 2.375" x .160" |
| Maximum size on square tube | 40 x 40 x 4 mm/ 1.50" x 1.50" x .160 |
| Maximum angle of curvature | 180º |
| Minimum radius of curvature | 3 times the pipe diameter. |
| Maximum radius of curvature | 320 mm |
| Automatic rotation speed | from 1,1 up 3,5 rpm |
| Motor power | 1.1 KW / 1.5 HP |
| Electrical voltage | 230V single phase 50/60Hz |
| Optional voltage | 110V single phase 50/60Hz |
| Intensity | 5 A |
| Machine weight | 365 Kg / 805 lbs |