STANDARD ACCESSORIES

  1. Two Hand Push Buttons Controlled
  2. Operator Control Panel Board (Off, Inch, Single & Continuous Stock)
  3. Foot Switch Operation
  4. Manual Lubrication System

OPTIONAL ACCESSORIES

  1. Stock Counter
  2. Motorized Lubrication System
  3. Pneumatic Counter Balance Cylinder
  4. Hydraulic Overload Safety Device
  5. Die Cushion

Pneumatic Power Press Specification

Model No. FNC 30 FNC 40 FNC 50 FNC 60 FNC 80 FNC 100 FNC 150 FNC 200
CAPACITY IN TONS 30 40 50 60 80 100 150 200
Crankshaft Diameter MM 140 145 160 170 190 196 220 230
Adj. Stroke Length MM 76 76 89 100 115 130 150 150
Adjustment of Ram MM 25 25 25 25 25 25 25 25
Punch Hole in Ram MM 38 38 45 45 50 50 80 80
Hole in Bed MM 89 95 101 115 130 150 200 225
Bed Size: Left to Right x Front to Back MM 585 x 355 635 x 355 685 x 406 712 x 457 738 x 508 891 x 612 1041 x 737 1100 x 817
Bed Thickness MM 70 76 83 88 95 114 127 137
Dist. between bed to Ram MM 292 320 350 380 380 406 457 482
Flywheel Weight. Kg. 110 150 210 300 340 360 450 800
Strokes per minute MM 40 40 40 40 40 40 40 35
H.P. Required                  
For Geared(1440 RPM) HP 3 5 5 7.5 10 10 15 20
For Ungeared (960 RPM) HP 5              
Air Pressure Required BAR 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5
Floor toTop of Bed MM 880 1000 1000 1000 1000 1000 1000 1000
"All Over Size : LR x FB x H" MM 1000 x 1100 x 2200 1100 x 1200 x 2400 1200 x 1300 x 2500 1300 x 1350 x 2650 1500 x 1500 x 2750 1750 x 1750 x 2900 2050 x 2000 x 3300 2200 x 2150 x 3500
Weight Approximate Kg. 1500 1900 2500 2700 3200 5500 6600 9000