RING ROLLER BENDER SECTION MACHINE MC200
- It's got two traction rollers. The two lower rollers are knurled and motorized to achieve a better traction.
- Safe transmission by treated and flat pinions.
- Steel treatedand rectified axis
- Bending regulation by means of the upper axis which permits to make bending operations in big pipes and profiles dimeters without any distortion
- It's equipped with 9 standard rollers and washers by means of which you can still make all kinds of profiles. (Square pipe, rectangular, solid square bar, round and rectangular, U profile, T profile, angle, flat bar, edge flat bar,..)
- Millimeter scale in the upper axis to regulate bending.
- Vertical and Horizontal working position in the same table.
- Side corrector rollers to rule the bending operation and make spiral bending's
- For single phased machines, request quotation
- Lower banch palletized to easily transport the machine to the workplace or store it in case of lacking space
RING ROLLER BENDER SECTION MACHINE MC200 |
Description |
Diameter of axes |
40 mm |
Useful axes length |
74 mm |
Center distance between lower axes |
286 mm |
Maximum capacity for bending round pipe |
2 1/2 inch or 63.5 mm. |
Motor Power |
1,1 KW / 1,5 HP |
Voltage supply |
3 phased 230/400 V |